Hitachi LM-C300 Series User Manual page 32

To select an option inside of a menu:
(1) Select the option you want to choose from the menu toolbar. (menu will be highlighted in blue)
Then click to open the menu and see the possible options of this menu.
(2) When the menu is open, select the option that you want to select (this option is highlighted in
blue) and click the mouse. Then press the left button of the mouse. In some cases it is necessary
to use more steps to select the desired option, but the procedure is the same.
You enter the information into an information box:
To change the information in the box, click the mouse on the box then will appear a vertical line. This
line is the cursor. The cursor shows your current position in the box. Move the cursor with the mouse
or with Left arrow key or Right arrow key. Then you can add or insert some characters, or use the
backspace key to delete a single character.
PASSWORDS
Touch Screen:
For the touch screen, the following passwords are set by default according to the access level:
[NOTE] In previous versions of the software, "Supervisor" is displayed as "Supervisor 1" and
"Maintenance" is displayed as "Supervisor 2".
Follow the procedure below to change the password (for example, password of "Maintenance").
1. Press "SETTINGS".
2. Press "YES".
Access level
Supervisor
Maintenance
- 32 -
Initial password
HILASER1
HILASER2