Access Levels - Hitachi LM-C300 Series User Manual

2.3. ACCESS LEVELS

You can use the following external controllers as user interface with the Laser Marker to make messages
and logos. These external controllers have three different access levels, and the functions available differ
depending on the access level. (See the table below)
 Touch Screen
 Laser Marker application PC software (Hereinafter referred to as Laser Application)
Touch Screen:
Touch Screen has three access levels and two of them are password-protected.
Access level
User
Supervisor
Maintenance
[NOTE] In old versions of the software, "Supervisor" is displayed as "Supervisor 1" and "Maintenance" is
displayed as "Supervisor 2".
Laser Application:
Laser Application has three access levels and two of them are password-protected.
Access level
User
Advanced User
Supervisor
Only operations related to "PRINT" are possible.
Operations related to "FILE", "EDIT", and "PRINT" are possible. Password
setting is required.
Operations related to "FILE", "EDIT", and "PRINT" and some operations
related to "SETTINGS" are possible. Password setting is required.
This level can only be used for operations related to printing.
This level mainly allows operations related to message creation,
modification, editing and printing.
This level mainly allows operations related to message creation,
modification, editing, printing, and laser settings except for some
settings.
Password setting is required.
Descriptions
Descriptions
Password setting is required.
- 26 -