AGFA DR 10e User Manual page 75

c) Grip the lock lever to pull out the cover plate.
3. Attach the battery.
2
Align the battery according to the guide marks. Insert the battery fully.
1.
Push down the battery.
2.
Figure 20: Attach the battery
The battery is locked in position automatically.
The detector starts up. The power indicator lights up green.
4. Check the DR Detector status icon on the DR Detector Switch. If the
displayed status is error and the detector is shared between NX
workstations, it may still be connected to another NX workstation. In that
case, register the DR Detector to the NX workstation.
The connection indicator is lit. The DR Detector is ready.
Before exposure make sure to check the equipment daily and confirm that it
works properly.
Related Links
Charging a battery
1
2
Note: Make sure that the battery is securely attached.
on page 102
DR 10e, DR 14e, DR 17e | Getting started | 75
0370C EN 20200228 1449