GE VARIVENT S Series Operating Instruction page 14

Safety
Qualification of personnel
The following minimum qualifications are required:
•
•
Each employee must meet the following requirements to work on the component:
•
•
•
•
•
•
•
When working with the component, a distinction is made between the following
user groups:
User groups
Staff
Operating personnel
Maintenance personnel
14
Training as a specialist for working independently on the component.
Adequate instruction to work on the component under the supervision and
guidance of a trained specialist
Personal suitability for the respective task.
Sufficient professional qualification for the respective task.
Received instruction about the functionality of the component.
Received instruction about operating sequences on the component.
Familiar with the safety devices and their function.
Familiar with these Operating Instructions, especially with the safety
instructions and the information which is relevant for the task on hand.
Familiar with the basic regulations with regard to occupational health and
safety and accident prevention.
Qualifications
Adequate instruction and sound knowledge in the following areas:
• Functionality of the component
• Operating sequences on the pump
• What to do in case of an emergency
• Lines of authority and responsibilities with respect to the task
Appropriate training and a sound knowledge of the structure and
functionality of the component.
Sound knowledge in the following areas:
• Mechanical equipment
• Electrical equipment
• Pneumatic system
Authorization with regard to safety engineering standards to carry
out the following tasks:
• Setting devices into operation
• Earthing of devices
• Marking of devices
The relevant certificates of qualification must be submitted before
work can be carried out on ATEX certified machines.
430BAL011074EN_5
08.11.2021