AGFA Drystar AXYS XL Reference Manual page 26

26 | Drystar AXYS XL | Advanced Operation (key-operator mode)
2. On the 'General' screen, press the Down key, followed by the Confirm key
to select 'Language'.
The 'Language' screen is displayed with the available languages (contact
Agfa for the latest language availability status). For example:
1*English
2 Nederlands
3 Deutsch
The currently active language is marked with a '*' on the left.
3. Press the up/down arrow keys to select the desired language.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
Changing the beep on empty tray settings
1. On the Change settings menu, press the Confirm key to select 'General'.
The 'General' screen is displayed:
2. On the 'General' screen, press the Down key twice, followed by the
Confirm key to select 'Beep on empty tray'.
The 'Audible alarm on empty tray' screen is displayed:
* 5 beeps
No beep
While tray is empty
3. Use the Up/Down arrow keys to select the desired setting:
• Select '5 beeps' to hear 5 consecutive beeps at the moment a tray gets
• Select 'No beep' if you do not want an audible signal to warn you that a
• Select 'While tray is empty' to hear a beep the whole time a tray is
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
3753B EN 20210520 0952
Note: The number of displayed languages depends on the
installed dataset.
empty.
tray is empty.
empty.
on page 23
on page 23