Table of Contents
Advertisement
Chapter
11
Data Communication
Data communications capabilities let you transfer data between two CASIO PV
Units, between a PV Unit and a BN-10/BN-20 Unit, or between a PV Unit and a
BN-10A/BN-20A/BN-40A Unit. You can also receive data from a CASIO SF,
CSF, or NX Series Unit, and communicate with a personal computer using PC
sync for Windows.
•
See the manual that comes with PC sync for Windows for details on connecting
to a computer and setting up for communication.
Using the Cable
The PV Unit comes with a cable for data communication. Use the following
procedure to connect the cable to the PV Unit.
To connect the cable to the PV Unit
1. Turn off PV Unit power.
2. Plug the cable into the cable connector at the bottom of the PV Unit as
shown below.
119
Advertisement
Table of Contents
