How Schedule Keeper Data Is Sorted; Schedule Type Labels And Icons - Casio SF-5590SY User Manual

—36-
schedule type.
10. While the cursor is in the description text, press OK to store all the data.
Note
« You must input a description. After that, you can skip any input by pressing OK
without inputting anything.
B Schedule Alarms
« If the alarm time is reached during data communications, the alarm does not
sound until you complete the communications procedure.
* The alarm may fail to sound if battery power is too low.
§ How Schedule Keeper Data is Sorted
1. By date
2. By time within the same date(data without time comes first)
@ Schedule Type Labels and Icons
Schedule Keeper Mode data includes an icon and a schedule type label. Initially,
schedule types are labelled "SCH TYPE 1" through "SCH TYPE 8", and the initial
default scheduie type icon is (3.
To change schedule type labels and icons
1. Press SCHEDULE to display the initial Schedule Keeper Mode screen.
2. Press FUNC and then select "Define type".
3. Use & and W to move the pointer to the schedule type you want to change.
4, input up to 13 characters for ihe new label you want to use.
Skip this step if you don't want to change the label or if you want to wait until after
you change the schedule type icon.
5. Fares Dee CHNG to display the menu of schedule type icons.
you do not want to change the icon assigned to this schedule t ki
5 through 7. 9 WPS, SIP StePS
6. Use A, W, 4 and P to move the cursor to the icon you want to use. Use #
and ¥ to move between menu screens.
7. When the icon you want is selected, press OK to register it and return to the
schedule type menu.
8. Press OK to store all your changes and return to the initial Schedule Keeper
Mode display.
You could change ihe schedule type label before pressing OK in step 8 if you
have not already done so. ,
*
To specify Schedule Keeper Mode index display contents
1. Press SCHEDULE to display the initial Schedule Keeper Mode screen, and then
press A, W, 4, or ¥ to change to the index display.
2. Press FUNC and then select "List type".
Pointer (selected type)
Marker
(current setting)
3. Use & and W to move the pointer next to the schedule type you wantto change,
anid then use "€ and ® to change the setting.
a Schedule types set to "Yes" appear in the index display, while those set to "No"
o not.
4. Press OK to quit and return to the index display.
—37-