Table of Contents
Advertisement
Chapter
15
Configuring the Unit
The System menu provides you with a number of items that you can use to set up
the unit to suit your particular needs.
Note that the System menu is available on the menu bar while the Mode Menu is
on the display.
Setting the Date, Time, and Auto Power Off
Interval
1. Tap Menu Bar to display the menu bar, and then tap System – Set date/
time.
•
You can also display the date/time setting screen by tapping the clock
on the pop up tool screen (page 112).
2. Tap the date next to Set date. This causes a date keyboard to appear.
3. Use the date keyboard to input the date you want to set, and then tap
NEXT.
•
You can specify a date within the range of January 1, 1901 to December
31, 2099.
4. After setting the date, tap the time next to Set time. This causes a time
keyboard to appear.
5. Use the time keyboard to input the time you want to set, and then tap
NEXT.
6. After setting the time, tap the value next to Auto power off.
Each tap of the value changes it in the cycle: 1 → 3 → 6 → 1, etc.
•
•
The value you set specifies how many minutes the unit allows to pass
without any operation being performed. After the specified number of
minutes, power is turned off automatically.
7. Tap Set to register your settings.
157
Advertisement
Table of Contents
