9. TO SAVE THE DATA TO ANOTHER MACHINE
It is commonly necessary to save all data stored in the customer's unit before repairing it. For this
purpose, you can transfer the data of the JD-5500 or C-310 unit to another unit using the following
procedure.
(1) To reset the receiving unit
Please reset the unit used to receive the data from the customer's unit according to the method
mentioned in section 4.
(2) To connect transmission unit with receiving unit
Please remove the covers of button battery compartments from both the transmission unit and the
receiving unit, and connect one with another as shown in the figures below:
— 20 —