Siemens SIMATIC NET SCALANCE W760 Operating Instructions Manual page 44

Connection
6.4 Antenna connector
Procedure
Follow the steps below to connect a cable for an external antenna to the device:
1. Insert the connector of the antenna cable into the R-SMA socket R1 A1 ① and screw
the screw cap of the connector onto the socket (key size SW8, tightening torque 1 Nm).
Figure 6-1
Note
Cabinet installation
When installing the device in a cabinet, you need to use a detached antenna. Suitable
flexible connecting cables for the connection between the device and a detached
antenna are available from SIMATIC NET. You will find detailed information in the
section Accessories (Page 22).
44
NOTICE
R-SMA antenna connector
When securing antennas to the device, only the screw cap of the antenna can be
rotated. Rotating the entire antenna could damage the R-SMA connector of the
device.
Figure of the ANT795-4MA; the arrow points to the screw cap.
Operating Instructions, 03/2022, C79000-G8976-C322-13
SCALANCE W760 / W720