Installing On A Din Rail / Removing - Siemens SIMATIC NET SCALANCE W760 Operating Instructions Manual

Installation and removal

5.2 Installing on a DIN rail / removing

Open equipment
The devices are "open equipment" according to the standard IEC 61010-2-201 or UL
61010-2-201 / CSA C22.2 No. 61010-2-201. To fulfill requirements for safe operation
with regard to mechanical stability, flame retardation, stability, and protection against
contact, the following alternative types of installation are specified:
• Installation in a suitable cabinet.
• Installation in a suitable enclosure.
• Installation in a suitably equipped, enclosed control room.
If the temperature at the cable or housing socket or at the branching points of the
cables exceeds 60 °C, special precautions must be taken. If the equipment is operated
at ambient temperatures in excess of 40 °C, only use cables with permitted operating
temperature of at least 80 ℃.
5.2 Installing on a DIN rail / removing
Procedure for installation
34
WARNING
WARNING
Operating Instructions, 03/2022, C79000-G8976-C322-13
SCALANCE W760 / W720