Turn On And Off; Volume Control; Dbb Control; Charge The Built-In Battery - Philips 7000 Setie User Manual

Turn On and Off

Press and hold
to switch on/off the unit.
Note
•
The speaker will turn off automatically after
15 minutes without user operations and music
playback.
•
In case of no response of button or function
error, you can press and hold Vocal fader and
buttons for 10 seconds to force shutdown, then
turn on the unit again to be used normally.

Volume control

Press +/－ touch key to increase or
decrease volume level.
Tip
•
While adjusting the volume, the white speaker
light will move up or down for 3 seconds.
•
When the volume meets the maximum level,
the white speaker light will fully turn on for 3
seconds.
•
When the volume meets the minimum level, the
white speaker light will turn off for 3 seconds.

DBB control

Short press DBB touch key to switch the
DBB (bass) level.
Function LED1 (Yellow)
DBB1 LED1 flash once then solid
DBB2 LED1 flash twice then solid
DBB off LED1 off
10 EN
touch key for 3 seconds
Charge the built-in
battery
Plug the AC power cord to charge the
built-in battery. The battery indicators
blink in different manners to indicate the
charging status.
Note
•
The four indicators on the unit will go out in 15
seconds after the battery is fully charged.
20%
50%
80%
100%
100%