Table of Contents
Advertisement
Listen to an external
device
With this product, you can listen to an
external audio device such as an MP3 player.
Play from an MP3 player
1
Connect an audio input cable (not
supplied) with a 3.5mm connector
on both ends to:
The Audio in socket on the unit.
•
•
The headphone socket on the
MP3 player.
Audio in
» The unit switches to the Audio in
mode automatically.
2
Play audio on the MP3 player (refer
to its user manual).
Audio out
This unit has a Audio out socket. You can
output the analog stereo audio signals to
external devices such as an active speaker.
Connect an audio cable (not supplied)
to the Audio out socket on the unit
and the audio in socket of the external
device, and the unit will output audio
automatically to the external device.
16 EN
Headphone
(3.5mm)
AUDIO OUT
Sing through microphone
Adjust microphone volume
Connect a microphone (not supplied)
into the Mic in socket of the unit, and
adjust the microphone volume by
turning the Mic vol knob.
Now, enjoy the karaoke singing!
Adjust echo
Adjust the microphone echo level to your
desired level by turning the Echo knob.
Vocal fader
Press the Vocal fader button to switch
between vocal fader on and vocal fader
off.
Voice changer
Press the Voice changer button on the
panel to switch among different voice
tones: Woman voice / Man voice /
Children voice / Normal effect.
Factory reset
Reset device to default setting.
1
Turn on the party speaker, press
and hold
and
+
seconds.
» Battery capacity LEDs flash three
times.
» The party speaker is reset and
enters standby mode.
buttons for 10
Advertisement
Table of Contents
