Table of Contents
Advertisement
3 Get started
Always follow the instructions in this
chapter in sequence.
Turn on/off
•
To turn the speaker on, press and
hold
for over two seconds.
» The Bluetooth indicator starts
flashing.
» The battery level indicators light
up briefly.
» The speaker beeps.
•
To turn the speaker off, press and
hold
for two seconds again.
Note
•
When there is no Bluetooth connection for
15 minutes or the battery is at low level, the
speaker turns off automatically to save power.
Check the battery level
The speaker is powered by the built-in
rechargeable battery. After power-on,
the speaker shows the battery level
immediately, and the battery indication
disappears in five seconds.
•
To manually check the battery level,
briefly press
power-off mode.
» The different behavior of the four
LEDs indicates different battery
levels.
LED indication:
Battery
LED 1
LED 2 LED 3 LED 4
power
Full
Solid white
> 80% Solid white
50% -
Solid white
80%
20% -
Solid
Off
50%
white
Low
Flash
Off
battery
red
(<20%)
Charge the built-in battery
Note
•
It takes you approximately three hours to
fully charge the battery.
•
The micro USB socket is for charging only.
•
Rechargeable battery has a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
You can use a power adaptor compatible
with Quick Charge 3.0 (not supplied; 5V
2A output recommended) to speed up the
charging process.
in either power-on or
LED 4
LED 3
LED 2
LED 1
Off
Off
EN
5
Advertisement
Table of Contents
