Prepare; Connect Power And Turn On - Philips BM5B/37 User Manual

3 Prepare

Always follow the instructions in
this chapter in sequence.
If you contact Philips, you will be asked
for the model and serial number of
this apparatus. The model number and
serial number are on the bottom of the
apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect power and turn on

Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the bottom of the speaker.
•
Risk of electric shock! When you unplug the AC power
adapter, always pull the plug from the socket. Never
pull the cord.
•
Before you connect the AC power adapter, make sure
that you have completed all the other connections.
• Connect the power adapter to
the DC IN socket on the back of the
•
speaker.
• the wall power socket.
» The volume indicator lights up.
» The signal strength indicators flash
for several seconds until the speaker
boots up.
» For first-time use or in single mode,
the indicator starts flashing and the
speaker enters pairing mode.
» When the speaker acts as the master
in group mode, the
flashing until the speaker finds the last
paired Bluetooth-enabled device.
» When the speaker acts as a slave in
group mode, the GROUP indicator
starts flashing until the speaker finds its
master in the group.
Tip
•
Single mode indicates to use a speaker as a single
Bluetooth speaker that does not acts as a master or
slave in a group of speakers.
•
Group mode indicates that several multiroom speakers
form a group, with one speaker acting as the master
and the others as slaves.
indicator starts
EN 7