Advertisement
Cleaning and care
Cleaning
CNT
CNT
1.Turn the machine off and let it cool
down. Wipe all outer surfaces with a damp
cloth. Clean clogged holes in the filter and
filter holder with a pin or small brush.
Descaling
1.Decalcifying is recommended regularly,
depending on water hardness. Remove the
brewing head (keep components together) with
a coin before filling the tank with water and
decalcifyer according to product instructions.
www.electrolux.com
2.When filled, the drip tray must be
emptied. Lift out the drip grid, empty, rinse
and dry the grid and tray. For hygienic reasons
we recommend to do this regularly.
2.Switch the machine on and let it heat up.
Place the filter holder in position, without any
fitler. Place a bowl on the drip grid. Turn the
selector dial to
and let 1/4 of the solution
pass through. Turn the machine off and wait
for 10 minutes.
3.Loosen the steam nozzle and wash it
under running water. Clean the small pipe with
a cloth. Lif out the ater tank and rinse it under
running water.
3.Turn the selector dial to
remaining solution flow through the steam
nozzle. Fill the water tank with fresh water and
run the machine until the tank is empty. Repeat
twice, with fresh water. Re-install components
and fix filter properly.
and let the
5
Advertisement
