Advertisement
3. Do the following:
1) Unfasten the sealing nut and lock nut from the supplied cable gland. As shown below,
pass the cable through the sealing nut, cable gland, hole in the network fish finder and
the lock nut.
2) Tighten the Lock nut on the back of the cable gland.
3) Position the cable so the vinyl sheath lies in the cable clamp, then use the supplied cable
clamp and set screw to secure the cable ensuring that the ground wire contacts
the chassis (below plastic cable clamp) then tighten down the screw. Now tighten
the sealing nut of the cable gland.
Advertisement
