Product Overview - 2N Access Unit Configuration Manual

1. Product Overview

Door access system 2N Access Unit can (with addon software and/or with 2N IP intercoms)
offers you a whole setup for access controle over any whole object.
Your 2N Access Unit can be equipped with a numeric keypad, so you can use it as code lock.
Your 2N Access Unit can also be equipped with another RFID card reader, so it can be used as a
part of your security system or attendance system in your company.
2N Access Unit can be equipped with a relay to control eletric lock or any other device
connected to this access system. There are a lot of possibilities to set up, when and how to
activate these switches - with code, automaticaly, by pressing a button etc.
The following symbols and pictograms are used in the manual:

Safety
• Always abide by this information to prevent persons from injury.

Warning
• Always abide by this information to prevent damage to the device.

Caution
• Important information for system functionality.

Tip
• Useful information for quick and efficient functionality.

Note
• Routines or advice for efficient use of the device.
2N Access Unit Configuration Manual
3 / 134