Programming Software Lnstalling & Starting (Takes Windows Xp As An Example) - CRT 8WP Instruction Manual

PROGRAMMING SOFTWARE LNSTALLING & STARTING
(TAKES WINDOWS XP AS AN EXAMPLE)
1. Double-click "CRT 8WP SETUP.EXE", and then install the
software as per computer instructions.
2. Click "START" menu, select and click "USB TO COM
PORT" in the "CRT 8WP " program from "ALL PROGRAM".
3. Connect the optional cable PC03 to the USB port in PC
device and connect the transceiver with the other end of
cable.
4. Double click "CRT 8WP
"START" menu to choose "CRT 8WP" entry in the
CRT 8WP program from "ALL PROGRAMS" menu (Refer
to picture 1).
5. As per computer command, choose serial port "COM Port"
firstly (Refer to picture2), then click OK to start programming
software.
TIPS:
In one individual computer, users need to choose different
COM Port number when USB cable is connected with different
USB port.
To program frequency, power on the transceiver firstly. Do
not power on/off the transceiver when it is connected with
computer. Otherwise, the transceiver can not read or write
frequency well. If this condition happens, please firstly close
the programming software, disconnect USB Connector(PC03)
from computer, then, connect the USB connector with
" setup short-cut icon or click
(picture 1)
(picture 2)
29
Professional
FM Transceiver