Instantaneously Squelch Off; Ctcss/Dcs Encode/Decode; Transmit Pilot Frequency - CRT 8WP Instruction Manual

ADVANCED OPERATIONS
transmits at high power .
when screen display " " icon, it means lower power is choosed, current
channel transmits low power.
when screen not display " " or " " icon, it means middle power is choosed,
current channel transmits middle power.

Instantaneously Squelch off

Under standby, press and hold the programmed key [PF1] of Instantaneously Squelch off,
transceiver emits " DU " beep and the squelch circuit is not mute, background noise can be
heard. Release this key, transceiver emits " DU DU" and the squelch circuit is mute. By using this
function you can monitor weak signal which is hard to receive.

CTCSS/DCS Encode/Decode

Under standby, press the programmed key PF 1 long press of CTCSS/DCS
encode/decode, screen displays " C-CDC
switch to choose desired CTCSS/DCS code, press this key
rotate channel
repeatedly to switch CTCSS/DCS or OFF. Press PTT key to exit.

Transmit Pilot frequency

This function is used for starting the repeater activated by Tone Pulse. In general, as long as the
repeater has been start, the repeater system doesn't need this Tone Pulse.
Press programmed key of Pilot frequency, hold this key for programmed long key time, transceiver
20
Professional
FM Transceiver
" and enter into CTCSS/DCS setting,