Vox Delay Setup; Battery Capacity Enquiry; Diirect Ch1 / Direct Ch2 - CRT 8WP Instruction Manual

ADVANCED OPERATIONS

VOX Delay Setup

If transceiver returns to receiving mode instantly after VOX transmitting, it may
cause signal missing, to avoid this problem, user can set a suitable delay time.
Under standby, press programmed key
"VOXDEY", rotate channel switch to choose desired delay time. Total has 10 levels of delay time for
optional, 0.5-5seconds. Press any other key to return standby state.
NOTES: Press this key repeatedly) also can select needed delay time.

Battery Capacity Enquiry

U n d e r s t a n d b y, p r e s s p r o g r a m m e d k e y o f " B a t t e r y C a p a c i t y
Enquiry",transceiver emits"DU" beep, screen displays current battery capacity.
Press this key again, transceiver emits "DUDU" beep and return back to
standby state.

DIirect CH1 / Direct CH2

Under standby, press programmed key of direct channel, transceiver emits "DU" beep and
enter into DIRECT CH1/ DIRECT CH2, screen displays frequency of direct channels, user can do
communication. Press this key again, transceiver emits "DI" beep and return back to original channel.
of VOX delay, screen displays
23
Professional
FM Transceiver