Receiving; Transmitting - CRT 8WP Instruction Manual

BASIC OPERATIONS

Receiving

You can hear the transmitting party's calling when the channel you are operating is called and the
LED light turns green.
NOTE:
You may not receive the calling if you set a high squelch off level of the transceiver.
If current channel has been programmed with signaling) you can only hear the call from a same
signaling) other calls can not be heard.

Transmitting

Before transmitting, make sure that the channel you want to use is not in busy state through
monitoring for a while by pressing the programmed Momentary Squelch off [PF1] / [PF2] key. Under
these conditions, press the [PTT] key and speak into microphone. Please keep around 2.5-5cm
distance between microphone and your lip. And please speak in normal tone to make the receiver
obtain best tone quality.
NOTE:
Press PTT key) LED indicator shows red light) means transmitting now) release PTT key to receive
signals.
15
Professional
FM Transceiver