ADVANCED OPERATIONS
The [PF1]、 [PF2]、
following functions by programming software.
NOTE: The keys can be programmed of long press and short press , if program of short press, the
function will be activated when press the programmed key , if program of long press, the function will
be activated when press and hold the key for programmed time.
Call
Under standby, press the programmed key to transmit the prestored and selected DTMF signaling.
Alarm
Press the programmed key of Alarm to activate Alarm funciton, the transceiver will sound alarm
beep, meanwhile, it start transmitting and send the alarm beep to companions or systems. Re-power
on to exit alarm.
NOTE: Alarm function shall be setup in the Emerge information of programmed software.
Monitor
Under standby, press the programmed key of monitor, the transceiver emits "DU" beep and enters
into monitor state. CTCSS/DCS decode will be ignored in monitor state, transceiver can monitor
signal of the other party as long as receiving the matched carrier wave.
16
Professional
FM Transceiver
and
keys are programmable. They can realize the
、
、