Frequency Reverse - CRT 8WP Instruction Manual

ADVANCED OPERATIONS
Under standby, press the programmed key of Squelch Levels Setup, LCD
displays Squelch level "SQL XX", rotate channel switch to choose desired level.
Total 10 squelch levels, 0-9, 0 is lowest, 9 is highest.
NOTE: Press the programmed key of Squelch Levels Setup repeatedly, also can level.

Frequency Reverse

Under standby, press the programmed key of Frequency Reverse,LCD
displays "REV ON" and enters into Frequency Reverse state, press key again
or wait 1second, radio will return back to standby state, LCD displays " " icon.
When frequency Reverse function is on, the current channel RX frequency will
be switched to TX frequency, the CTCSS or DCS signal which has been setup
will be also switched. Repeat the above operation, the transceiver exits reverse
functions with LCD displays "REV OFF" , when return back to standby state, " "
icon disappears.
NOTE: Under Frequency reverse state, transceiver can not communicate with other transceivers
through repeater.
18
Professional
FM Transceiver