Installing / Removing The Belt Clip; Installing The Additional Speaker/ Microphone (Optional) - CRT 8WP Instruction Manual

PREPARATION

Installing / Removing the Belt Clip

■ Installing the Belt Clip:
Place the belt clip to the corresponding grooves
on the back of the transceiver, and then clockwise
screw it.
■ Removing the Belt Clip:
Anticlockwise turn the screws to remove the belt
clip.

Installing the Additional Speaker/ Microphone (Optional)

Unveil the MIC-SP jack cover and then insert the
Speaker/Microphone plug into MIC-SP jack.
NOTE:
1.To keep transceiver waterproof) must cover the
MIC-SP jack by standard jack cover.
2. The transceiver is not completely waterproof while
using the Speaker/Microphone.
9
Professional
FM Transceiver