Basic Operations; Switch On / Off Transceiver; Adjusting Volume; Channels Selection - CRT 8WP Instruction Manual

BASIC OPERATIONS

Switch on / off Transceiver

Switch on Transceiver: Under power-off state, turn POWER / VOLUME clockwise till hearing
"Click" to switch on the transceiver. The transceiver will announce "Power on" when power-on.
Switch off Transceiver: Under power-off state,turn POWER / VOLUME anticlockwise till hearing
"Click" to switch off the transceiver.

Adjusting Volume

Under power-on state, turn POWER / VOLUME switch to adjust the volume. Turn clockwise to
increase the volume, and anticlockwise to decrease the volume. You can press the programmed key
of momentary squelch off [PF1] / [PF2] to monitor current volume.
NOTE: You can firstly press the programmed key of momentary squelch off [PF1] / [PF2] to monitor
the background noise and meanwhile turn POWER / VOLUME to adjust the volume. Under the
communicating state, you can adjust volume as per your need more accurately.

Channels Selection

Under standby, turn channel selector knob to choose the desired channel, Turn clockwise to
increase the channel, anticlockwise to decrease the channel.
NOTE: This transceiver has 128 channels for use, if there is a null channel between 2channels, when
manually select channel, transceiver will skip null channel, enter into next channel directly.
14
Professional
FM Transceiver