Makita DFL083F Series Quick Start Manual page 4

F
eatures and benefits
Programmable speed control
• Speed control can be programmed depending on types of joints
(hard joint or soft joint) or takt time.
• Speed control program can consist of up to 6 steps
• Speed control program you have set can be entered into the
machine from your Windows (7/ 8/ 10) PC with a USB
connection.
• Forward/reverse setting is available at every one of the 6 steps.
Designed to meet
homologation requirements
• Torque accuracy value:
obtained from our tests performed in accordance
with VDI/VDE2647.
• Stable torque value
achieved by using a new bevel gear between
the clutch and the output shaft to improve
gear engagement for smooth power transmission.
9.5mm (3/8") Square drive
Spindles for 6.35mm (1/4") C form
bit and 6.35mm (1/4") Square drive
are also available as optional acces-
sories. (Only DFL083F/125F/204F)
Poka-yoke (mistake-proofing) device
can be externally attached.
Housing is designed to be externally equipped
with the transmitter of TW-800 series of HERUTU
ELECTRONICS CORPORATION, which is
regarded as a reliable wireless poka-yoke device
by automobile manufacturers.
Maintenance alarm
• A yellow LED starts blinking to
indicate that the preset number of
screws tightened is reached.
• Auto stop function can be addition-
ally preset.
New protectors are designed to prevent damage to car body etc.
Description: Protector I
Part No. 422279-7, 422280-2, 422281-0,422282-8
For
DFL083F/ DFL125F/ DFL204F
Color: red/ blue/ yellow/ transparent
10%, 3 , Cm 1.67
*
* *
* *
*
* *
*
* * *
Indication lamp and beeper
of battery power reduction. If battery power reduces further, the motor
automatically stops to prevent incomplete fastening.
(See the instruction manual for detailed information on the behavior of
the lamp and the beeper.)
New accessory (Protector)
4/ 6
* * *
Model
DFL083F
DFL125F
DFL204F
DFL302F
DFL403F
* *
* Hook (Hanging loop)
* *
useful to hang the tool
< Illustration shows model DFL083F >
Powered by 14 .4 V Li-ion battery
BL1415N/NA/NAP
BL1430A/AP/B
BL1440
BL1450
BL1460A/AP/B
Note: When using the tool with BL1430A, if necessary
fastening torque cannot be obtained, Auto-stop system
will be activated to stop the motor regardless of
the remaining battery capacity displayed on the battery.
Auto-stop system
warn
assembly worker visually and audibly
*The same advantage as Model DFL082F/301F/402F
* *The same advantage as Model DFL124F/203F
* *
*The same advantage as Model DFL651F
Description: Protector I
Part No. 422284-4, 422285-2, 422286-0,422287-8
For
DFL302F/ DFL403F
Color: red/ blue/ yellow/ transparent
Torque range RPM (min-1)
2 - 8 N・m 150 - 700
5 - 12 N・m 100 - 700
8 - 20 N・m 100 - 440
16 - 30 N・m 70 - 230
25 - 40 N・m 50 - 220
* *
( option)
BL motor
same Motor as DFL651F
Single LED job light
with afterglow function
:
1.5Ah
:
3.0Ah
: 4.0Ah
: 5.0Ah
:
6.0Ah
*
* * * * * *
*
* *
* * * *
* *
*
* *
*
*
*
* * * * * *