Philips AVENT SCF283 User Manual page 7

Preparing for use
Filling the basket
Before you put the items to be sterilized in the basket, clean them thoroughly in the
dishwasher or clean them by hand with hot water and some liquid soap. Make sure
you remove all milk residues.
Note: Make sure all items to be sterilized are completely disassembled and place
them in the basket with their openings pointing down, to prevent them from
filling with water.
Note: Do not stack the items too closely together. The steam has to be able to
circulate around the items to ensure effective sterilization.
There are several ways to fill the basket:
Four Philips AVENT feeding bottles
1 Place the bottles upside down in the bottle cavities. (Fig. 7)
2 Place the nipples in the nipple cavities (Fig. 8).
3 Place the screw rings loosely on top of the nipples (Fig. 9).
Note: Larger screw rings only fit if placed in slanted position over the nipples.
4 Place the dome caps in the dome cap holders (Fig. 10).
Two large Philips AVENT feeding bottles 11oz (330ml)
1 Insert the rim of the bottles into the slots for large bottles (Fig. 11).
2 Place the nipples in the nipple cavities (Fig. 12).
3 Place the screw rings loosely on top of the nipples (Fig. 13).
Note: Larger screw rings only fit if placed in slanted position over the nipples.
4 Place the dome caps in the dome cap holders (Fig. 14).
Four Philips AVENT storage cups and lids
1 Place the storage cups upside down in the basket (Fig. 15).
2 Place the lids vertically around the cups. (Fig. 16)
ENGLISH
7