Establishing Power Supply; Connecting The Battery Block - Seca 644 Manual

4.3 Establishing power supply

Connecting the battery
86 •
The scale is powered by a battery block or a power
pack (both included in scope of supply). Depending on
model, the scope of supply will include either a power
pack with plug adapters or a power pack with a fixed
Euro connector.
block
1. Undo the screws of the battery compartment.
2. Remove the lid of the battery compartment.
3. Remove the battery block from the battery com-
partment.
4. Remove the connecting cable from the battery
compartment.
5. Connect the connecting cable to the battery block.
6. Insert the battery block in the battery compartment.
7. Screw the battery compartment lid onto the battery
compartment.