Setup; Connecting; Verification - Arrow verical CYPRESS S6SBP201A1AVA1001 Operation Manual

4.

Setup

4.1

Connecting

1. Connect the board to the power supply, load equipment and voltage meter as below.
+12V Power
Supply
4.2

Verification

1. Connect ENA pin to PGND1f, then, turn on +12V power supply.
2. Connect ENA pin to VBATf, then, DC/DC converter will start output.
3. Check that VOUTf is the same as the 'Output Voltage' of Figure 2-1 Evaluation Board Specification.
S6SBP20xAxxVA1001 Operation Manual, Doc. No. 002-08763 Rev. *A
Error! Use the Home tab to apply 見出し 1 to the text that you want to appear here.
Figure 2 Connecting the Board and Some Equipment
-
+
-
Voltage
Meter
+
-
Load
+
9