Hisense AVC-05HJFA Operation Installation Maintenance Manual page 13

For Concrete Slab
150 to 160mm
Screw in
(100 to 150kg)
Concrete
Suspension Bolt
Fixing Point
(W3/8 or M10)
For Wooden Beam
Suspension
Wooden Rib
(60mm to 90mm
lumber)
Wooden Beam
Fig. 4.4 Mounting the Suspension Bolts
4.3.2 Connection Points of Suspension Bolts and Pipes
Location of 4 Suspension Bolts
M10 or W3/8
(Field-Supplied)
Surface of Ceiling
* Confirm the distance between the bottom surface of indoor unit and
the surface of ceiling.
Fig. 4.5 Mounting Suspension Bracket
Fig. 4.6 Indoor Unit and Air Panel
For Steel Beam
Beam
Suspension Bolt
(W3/8 or M10)
Nut
Square Washer
Square Washer
Nut
Suspension Bolt
mm
Nut
(Field-Supplied)
Washer
(Accessory)
mm
Drain Pipe
4.3.3 Mounting the Indoor Unit
Mount the indoor unit as shown in Fig. 4.4.
Mount field-supplied parts
Suspension bolt
Nut
Washer
(1) Mount nuts and washers to the suspension bolts.
Suspension Bolt (Field Supplied)
Nut (Field Supplied)
* Insulating Washer
(Accessory)
Bracket (for Fixing Indoor Unit)
Washer (Accessory)
Nut (Field Supplied)
Surface of Ceiling
* Mount the washer with its insulating surface
facing down
Fig. 4.7 Mounting Nuts and Washers
(2) Lift the indoor unit by hoist, and do not
put any force on the water pan.
(3) Secure the indoor unit using the nuts and
washers.
Suspension Bolt
Suspension Bracket
Fig. 4.8 Mounting the Indoor Unit
Note: If a false ceiling has already been
installed, be sure to complete all piping and
wiring works inside the ceiling before
hooking-up the indoor unit.
3
4-M10 or W3/8
8-M10 or W3/8
8-M10 or W3/8
mm
Water Pan