HP Integrity rx4640 Upgrade Manual page 46

Hide thumbs Also See for Integrity rx4640:

Table of Contents

Upgrade Procedures for 1.5 GHz (A9731A) or 1.6 GHz (A9732A, or A9733A) Processors

Introduction

Step 4. Plug in the processor cable to its socket on the extender board.

Step 5. Place the sequencer frame over the processor.

Step 6. Using the supplied CPU install tool, tighten the T15 shoulder screws 1, 2, 3, and 4 until they just

bottom out. Follow the tightening sequence shown in Figure 3-3, "Installing Processor on Extender

Board."

Chapter 3

Table of Contents