Engine Stop Operation - Mazda BCKA V7 620 User Instructions

8-2. Engine stop operation

Operation
Press F switch
 Press switches until sound is heard.
 Release F switch when beep sound
is heard
Note
The controller buzzer will sound if the engine is stopped for reasons other than

opening a door or the pre-set engine warm-up time has elapsed.
⇒P.13
Other Engine Stop Conditions

The engine will stop if one of the following conditions is true.
1) The hood is opened.
2) The shift lever is put in a position other than the "P" position.
3) A door is opened.
4) The push start switch is pressed.
5) The pre-set warm up time has elapsed.
6) The brake pedal is engaged.
7) The accelerator pedal is engaged (the engine stops by the rpm restriction).
8) There is an advanced key or smart key inside the vehicle.
Note
If the engine is started with the push start switch, it cannot be stopped with the

remote control.
The vehicle cannot be driven when the engine is started using the remote

control. To start driving the vehicle, stop the engine with the remote control or
opening the vehicle's doors and restart the engine using the vehicle's push
button start switch.
Press STOP switch
while LED light
(green) is flashing
(approx. 3 seconds)
15
Indication
LED light color:
Engine stop
Green
Engine not stopped* or
Red
Communication error
* Radio signal from remote
controller not received.
Operate in reception range.