Panasonic NR-E411GH-N3 Operating Instructions Manual page 7

3. Plug the power plug into the wall outlet.
Insert the power plug into its matching wall outlet with rated voltage and current.
The power plug can be plugged into the socket immediately after installation of the refrigerator.
When the power is turned on, the periphery and surface (sides) of the refrigerator may be very hot.
(When the ambient temperature is 30°C, the temperature of the refrigerator is about 50°C to 60°C), which is
normal. (P. 23)
After unplugging the power plug, wait at least 10 minutes before plugging the power plug again. (P.25)
4. Cooling the refrigerator interior
It takes about 4 hours to cool the refrigerator interior.
In summer, it takes 24 hours or longer to cool the refrigerator interior evenly.
The ice can be made only after the refrigerator interior is completely cooled.
Do not open/close the refrigerator doors until the refrigerator interior is completely cooled.
(The warm air flow is to enter the refrigerator interior and hinder the cooling function.)
Requests
Do not place items on the top
of the refrigerator.
The operation of the compressor
on the top of the refrigerator also
generates heat.
If the heat builds up without release, it
may reduce the cooling capacity of the
refrigerator.
Notices
After installation of the refrigerator, the noise
gets louder. This is because the refrigerator
interior has not cooled down yet, and the
compressor or fan rotates at a high speed,
which is a normal phenomenon.
(After the refrigerator interior cools down, the
compressor
noise is also reduced.)
Installation
7