Installation Manual Double Din Kit - Pioneer CA-HM-KIA.016 Manual

Installation Manual Double DIN Kit

All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
Remove the original panel,
unmount the air vents;
If the car is equipped with
Start and Stop engine,
unmount the button.
Remove and save the clips
from the original panel as
shown in the picture.
Unscrew and save the 4
screws of the original radio as
shown in the picture.
Take the left and right bracket
and mount them on the
aftermarket radio each with
the 2 supplied screws .
Before insert the radio pull
down the internal bracket of
the radio tunnel as shown in
the picture.
Connect all cables, verify the
proper functioning of the
system and insert the radio
unit into the housing. Fix it
with screws saved before, as
shown in the picture.