Reference Marks Used For Adjustment - Yamaha YSP10 Service Information

13.3. Reference marks used for adjustment

Upon adjusting in this section, the following marks on conveyor are used.
When a recognition error occurs, perform cleaning or mark adjust.
No.
"13.11.2 Adjust the PCB camera's scale and position"
1 "13.11.3 Adjust the inspection camera's scale and
position (optional)"
"13.7 Adjust the R-axis initial positions"
2
"13.8 Adjust the R-axis linearity"
Print table
1
Perform
2
[Mark No.] setting
2 for PCB camera
7 for inspection camera
1
1
SI1906002E-001=YSP10 installation and adjustment procedures
65/120
For Service Engineers
Service Information
Remark
Circle φ2mm
2 Circle φ2mm
2