Modify Cable Connections Of The Ce Transformer - Yamaha YSP10 Service Information

12.3. Modify cable connections of the CE transformer

To accommodate to a range of mains voltage, modify cable connections inside of the CE transformer.
Remove the upper cover of the CE transformer.
Remove two screws using
1
a Phillips screwdriver.
Modify cable connections on the terminal block of the CE transformer referring to
the cable diagram sticker.
The cable diagram sticker is on the top of the cover removed in Step 1.
According to the cable diagram sticker
(colored portion in below left figure),
rewire the terminal blocks (colored
portions in below right figure.
Two circuit breakers
SI1906002E-001=YSP10 installation and adjustment procedures
53/120
For Service Engineers
Service Information
Remove the cover taking
2
care not to interfere with
the circuit breakers inside.