Check The Board Request Signal From The Downstream Machine To Ysp10 - Yamaha YSP10 Service Information

10.4. Check the board request signal from the downstream machine to YSP10

When the downstream machine is a YAMAHA machine, on the machine's application, turn
on the address corresponding to "BUSY OUT" (board request signal) as shown below.
If the downstream machine is not a YAMAHA, ask the customer or the machine maker's service
representative to perform equivalent task.
Note
The "BUSY OUT" address of the downstream machine differs by machine model.
Select "Conveyor" on
the OUTPUT side
In the YSP10's application screen, select the [Unit] button.
Example: YS24(DS)
Press the button
2
SI1906002E-001=YSP10 installation and adjustment procedures
49/120
For Service Engineers
Service Information
Press to select
"0" turns to "1".
1