Door Storage - Maytag 12591308 Owner's Manual

Fresh Food Features

Door Storage

Dairy Center
The dairy center provides convenient storage
for items such as butter, yogurt, cheese, etc.
This compartment is an adjustable feature
located in the door. It can be moved to
several different locations to
accommodate storage needs.
• To remove, slide dairy center
up and pull straight out.
• To install, reverse above
procedure.
Tilt-Out Door Buckets
(some models)
The Tilt-Out Bucket assembly consists of a bucket and
frame, providing adjustable, convenient storage for
food items in door. The bucket assembly tilts forward
for easy access of items, and lifts out for ease in
cleaning and adjusting.
To remove and install bucket:
• To remove bucket, tip bucket
forward and pull straight out
to remove.
• To install bucket, slide bucket
into bucket frame and push
bucket upright.
To adjust bucket frame:
• Remove bucket per above instructions.
• Lift frame off door support and place in desired
door location.
Grip Pads
The Grip Pads prevent objects
from sliding in the door bucket.
Grip Pads are removable and are
top-rack dishwasher safe for easy
cleaning.
Beverage Chiller™/
Mini-Chiller™
The Temperature-Controlled Beverage Chiller™ and
Temperature-Controlled Mini Beverage Chiller™ keep
beverages and other items up to 3°C colder than the
rest of the fresh food section. Air inlet allows air from
the freezer section to pass to Beverage Chiller™.
The Beverage Chiller™ control is located
on the left wall of fresh food section.
Control adjusts amount of air circulating in
Beverage Chiller™. Turn control toward the
large snowflake icon for colder temperature.
To remove and install Beverage Chiller™:
• If located directly above Chiller,
dairy center or door bucket may
need to be removed. Refer to
appropriate instructions and
remove item. Slide Beverage
Chiller™ assembly up and pull
straight out.
• To install, align one of the
Beverage Chiller™ cold air
intake holes (A) with one of
the two air inlets (B) in door
liner. Push assembly down
onto door liner retainer until
it stops.
IMPORTANT: Beverage Chiller™ will not operate
properly if air intake holes are not aligned with air
inlet in door liner.
Door Buckets
Door buckets adjust to meet
individual storage needs.
• To remove, slide bucket up and
pull straight out.
• To install, reverse above procedure.
10
(some models)
B
A