2 0 0 H o u r S e r v i c e
R e b o u n d D a m p e r I n s t a l l a t i o n
1
Install the seal head onto the rebound damper shaft with the flat end
Loctite Threadlocker Blue 242
facing the rebound damper piston.
Add a small drop of Loctite Threadlocker Blue 242 to the rebound
damper piston threads.
Thread the damper piston onto the shaft and tighten it.
15 mm
2.4-4.0 N·m (21-35 in-lb)
2
Insert the rebound damper and seal head into the upper tube.
Push the seal head into the upper tube until the retaining ring groove
is visible.
54
Rebound Damper Installation