Safety; Use Of Equipment; Hazard Icons; General Hazards - Ossila Solar Cell I-V Test System User Manual

Solar Cell I-V Test System (Manual)
3.

Safety

3.1

Use of Equipment

The Ossila Solar Cell I-V Test System (Manual) is designed to be used as instructed. It is
intended for use under the following conditions:
Indoors in a laboratory environment (Pollution Degree 2)
•
Altitudes up to 2000m
•
Temperatures of 5°C to 40°C; maximum relative humidity of 80% up to 31°C.
•
The unit is supplied with a 24 VDC power adapter with a power cord for the country of purchase,
in accordance with European Commission regulations and British Standards. Use of any other
electrical power cables, adaptors, or transformers is not recommended
3.2

Hazard Icons

The following symbols can be found at points throughout the rest of the manual. Note and read
each warning before attempting any associated operations associated with it:
Table 3.1. Hazard warning labels used in this manual.
Symbol
Electrical shock
3.3

General Hazards

Before installing or operating the Ossila Solar Cell I-V Test System (Manual), there are several
health and safety precautions which must be followed and executed to ensure safe installation
and operation.
3.4

Power Cord Safety

Emergency power disconnect options: use the power cord as a disconnecting method
and remove from wall. To facilitate disconnect, make sure the power outlet for this cord
is readily accessible to the operator.
Ossila.com
Associated Hazard
6
User Manual
Ossila Limited © 2022