Hypercom 4205 Manual page 3

How to enable your credit
card machine:
Option 1
Connect directly into an
analog phone line
1. Connect telephone cable
into the "LINE" port on the
back of the terminal
2. Connect the other
end of the cord into a
telephone jack
3. Connect power cord (see
"How to Power Up")
Option 2
Share line with fax machine
1. Connect telephone cable
into the "LINE" port on the
bottom of the terminal
2. Connect the other end into
the second phone jack
available on the fax machine
3. Connect power cord (see
"How to Power Up")
Note: The fax machine will
have two phone ports: TEL/
EXT and LINE. Ensure you
have the credit card machine
plugged into the TEL/EXT port
in the back of the fax machine.
The LINE port should have a
telephone line going into the
telephone jack on the wall.
Power & cables included with machine
Hypercom
4205
Password
The password will be one of
the four passwords below:
A. "0" (8 times)
B. "0" (4 times)
C. "1" (8 times)
D. "1" (4 times)
If You Require a
Prefix to Dial Out
1. Press "FUNCTION 2" then
press
2. Enter password
3. Enter prefix then press
Note: Number "1" is already
programmed in the machine.
Setting Date & Time
1. Press "FUNCTION 10",
then press
2. Enter the password, then
press
3. Enter date (mmyy), then
press
4. Enter time (in military
time, i.e. 1500 is 3:00pm),
then press
Connections
Telephone AC Power
Cable Adapter
Plug In & Power Up
Hypercom 4205
How to Power Up
To power
up your
machine,
connect the
AC power
adapter into
the terminal
and turn the
connector
on the
terminal 180°
counter-clockwise to
the "lock" position. To
unlock, simply turn it
clockwise.
Loading 2
Thermal Paper
To load the
thermal paper,
lift the cover
on top of
the terminal
and place the roll in the
slot. Pull approximately
two inches of the paper
towards the screen
and close the cover
with the paper sticking
out. Tear off the excess
paper. Thermal paper
is available at any office
supply store.
www.LawPay.com
Support Line: 800.459.5798
Monday-Friday: 7am-7pm CST
support@lawpay.com
1/4
2