Page 3
Page 3 WS1CT & WS1.25CT Manual Table of Contents OEM System Setup .....................4 Installer Displays and Settings ................5 User Displays ......................7 CT Front Cover and Drive Assembly ..............8...
Page 4 WS1CT & WS1.25CT Manual OEM General Instructions OEM System Setup STEP 1SS – From normal mode, press SET and ▲ simultaneously for 3 seconds and release. Then STEP 1SS press SET and ▲ simultaneously for 3 seconds and release.
Page 5 WS1CT & WS1.25CT Manual Installer Displays & Settings (1-99 Days Between Regeneration option) Step 1ID - Access this mode by pressing SET and ▲ for approximately 3 seconds. The number STEP 1ID of days between regenerations may need to be varied based on usage and water conditions.
Page 6
Page 6 WS1CT & WS1.25CT Manual Installer Displays & Settings (7 day option) STEP 5I7 – Sunday Regeneration: To regenerate on Sunday use ▲ or ▼ until the arrow points STEP 5I7 to Regen. If the arrow does not point to Regen a regeneration will not occur on Sunday. Press SET to go to STEP 6I7.
Page 7 WS1CT & WS1.25CT Manual User Displays When the system is operating one of two displays will be shown. Pressing ▲ or ▼ will alternate General Operation between the displays. One of the displays is always the current time of day. The second display is the days remaining until the next regeneration.