Weather Band Operations; Disc Warnings - Magnadyne M4-LCD Operation And Installation Manual

Am/fm/wb stereo receiver with disc player and touch screen controls
Hide thumbs Also See for M4-LCD:
Table of Contents

Advertisement

Weather Band Operation
Power On/Off:
Press the power button ( ) to turn the unit on.
Selecting the Weather Band Radio Source:
Touch the HOME button to activate the Homepage
screen. Press the
hand corner of the screen to reveal the second
Homepage screen. Touch the WB button and the
strongest weather band station will automatically
be selected and start playing.
Notes:
1. The remaining weather band stations will be
stored in the Radio Station Recall buttons.
Touch any of the Radio Station Recall buttons
to select another weather band station.
2. To exit the weather band screen, touch the
BAND button to select the AM/FM radio sta-
tion screen or press the HOME button to
DVD
select another source.
12cm disc
(Single-sided disc only)
CD

Disc Warnings

12cm disc
DVD
Handling:
12cm disc
MP3
(Single-sided disc only)
• Dirt, dust, scratches and warping disc will cause
12cm disc
non-operation.
CD
• Do not place stickers on disc or scratch disc.
12cm disc
• Do not place discs in the following places: Direct
sunlight, dirty, dusty or damp areas, near car
MP3
heaters, car seats or dashboard.
12cm disc
Disc Cleaning:
Use a dry, soft cloth to wipe the disc's surface. If the
disc is very dirty, use a soft cloth slightly moistened
with isopropyl (rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional record
cleaners as they may mar the surface of the disc.
Note: A disc may become somewhat scratched
(although not enough to make it unusable)
depending on handling and conditions in the usage
environment.
Preparing New Discs with Rough Spots:
A new disc may have rough edges on its inside
and outside edges. If a disc with rough edges is
used, the proper setting will not be performed and
the player will not play the disc. Therefore, remove
the rough edges in advance by using a ball point
pen or pencil as shown. To do this, press the side
of the pen or pencil against the inside and outside
edges of the disc.
14
in the lower right
Label side up
Do not touch
the underside
Label side up
of the disc
Do not bend
Do not touch
the underside
of the disc
Wipe the disc from
Do not bend
the center toward
the outside edge
Wipe the disc from
the center toward
the outside edge
Rough spots on
outside edge
Rough spots on
Rough spots on
outside edge
inside edge
Rough spots on
inside edge
Ball point pen
or pencil
Ball point pen
or pencil

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

M3-lcd

Table of Contents