Magnadyne M9800 Installation And Operation Manual

M9800 am/fm/wb stereo receiver

Advertisement

Quick Links

R
Installation
and Operations
Manual
M9800 AM/FM/WB Stereo Receiver
© Copyright 1998
Magnadyne Corporation

Advertisement

Table of Contents
loading

Summary of Contents for Magnadyne M9800

  • Page 1 Installation and Operations Manual M9800 AM/FM/WB Stereo Receiver © Copyright 1998 Magnadyne Corporation...
  • Page 2: Mechanical Installation

    Introduction Your new AM/FM unit incorporates a microcomputer managed electron- ic AM/FM stereo tuning system and FM Optimizer. The two as a combina- tion will provide the user with the finest crystal clear AM/FM stereo radio broadcast reproduction. To insure trouble free long term per- formance from your new unit, please take a moment to read this manual completely to make yourself aware of...
  • Page 3: Installation Procedure

    Installation Procedure Removing the Unit: In the event that the unit requires removal from it’s mounting location, repeat the following procedures. A. Release the rear support strap. B. Insert the keys provided into the slot on both sides of the chassis until locked.
  • Page 4 Installation Procedure Figure 1 R .F W EA Removal Keys Metal Strap Mounting Sleeve Removing the Unit Sheet Metal Screw Washer Dashboard...
  • Page 5 To properly connect the speaker system to your new Magnadyne radio, you must have a + and - wire coming from every speaker to connect to the unit. If you are connecting 2 speakers, you should have 4 wires to connect.
  • Page 6 Installation Procedure Four Speaker Wiring Black Wire 12 VDC Ground Black/Gray Wire Gray/Red Wire Black/Green Wire Green/Red Wire Gray/Black Wire Gray Wire Green/Black Wire Green Wire Red Wire 12 VDC Ign./Acc. Lead Orange Wire 12 VDC Constant Two Speaker Wiring Black Wire 12 VDC Ground Black/Gray Wire Gray/Red Wire...
  • Page 7 Control Button Identification Figure 2 2 1 6 1. On/Off Power Switch, Control and Volume Level Adjuster. 2. Fader Control. 3. Balance and Tone Controls. 4. Radio Band Selector Button. 5. Manual Tuning Control Buttons. Display Figure 3 Figure 4 6.
  • Page 8: Using The Radio

    Using the Radio Listening to the Radio: 1. Turn the vehicle’s ignition key to the “ON” or “ACC” position to pro- vide power to the radio. 2. Rotate knob (1) clockwise to turn the radio on. Adjust the volume knob (1) to a low listening level. 3.
  • Page 9: Clock Setting

    Clock Setting Setting the Clock with the Radio OFF 1. Turn the vehicles ignition key to the “ON” or “ACC” position to pro- vide power to the radio. You will know that radio has sufficient power as the clock will be displayed in the LCD display window (9).
  • Page 10: Audio Adjustments

    Audio Adjustments Volume Level 1. Rotate the volume control knob (1) clockwise to increase the volume. 2. Rotate the volume control knob (1) counter clockwise to decrease the volume. Left to Right Balance 2. Rotating the “BAL “ knob (3) to the left will balance the speakers to the left.
  • Page 11: Specifications

    Specifications AM/FM Tuner: FM Frequency Range . . 87.5 - 107.9MHz AM Frequency Range . . 520 - 1720 KHz IF Rejection ....AM 45dB ......Image Rejection .
  • Page 12: One (1) Year Limited Warranty

    Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within 1 year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said...

Table of Contents