Control Panel - ADJ ENCORE FR PRO COLOR User Manual

The fixture includes an easy to navigate system menu control panel display where all necessary set-
tings and adjustments are made. (See image below)
• MODE: Cycles through the main menu options and/or return to previous menu without making
changes.
• DOWN/UP: Scroll through options in the selected menu.
• ENTER: Select highlighted option and/or confirm selection.
ENCODER KNOBS
The control panel features two encoder knobs to the right of the Up/Down buttons. The dimming
knob is used to manually adjust the brightness of the fixture, while the zoom knob is used to manu-
ally zoom in and out. Press each knob to activate manual adjustment, twist clockwise to increase,
and twist counter-clockwise to decrease. Please note that these knobs will NOT function when
DMX is connected and active.
DISPLAY SCREEN LOCK
When the Display Lock setting is set to 1~10min, the display screen will automatically lock if there is
no activity for the specified length of time. To unlock the display screen, simply press and hold the
MODE button for 3 seconds. Alternately, when the Display Lock setting is set to OFF, the display
screen will never automatically lock. However, it can still be manually locked by pressing and hold-
ing the MODE button for 2 seconds. To unlock, press and hold the MODE button for 3 seconds.
KEY LOCK
This device features a key lock feature designed to prevent accidental key presses. The selectable
settings are as follows:
• OFF: Keys are not locked (default).
• ON: Keys are locked, and can be unlocked by pressing and holding the Mode button for 10 sec-
onds.
• ON1: Keys are locked, and required a passcode to unclock the device. To unlock, press the
Mode button so that "LOCKED *****" is displayed on the screen, then press UP DOWN UP
DOWN ENTER in that order.

CONTROL PANEL

16