Tailgating And Travel Position - Pit Boss PB2BPCG2 Assembly And Owner's Manual

TAILGATING AND TRAVEL POSITION

Collapsing your grill into the travel and tailgating position allows the grill to be used in very limited space and can easily be
tucked away for storage. Built with its own carrying handle, you just became a griller-on-the-go! Get fired up for the game, enjoy
a weekend away, or start grilling on your home patio; there is always good reason for a quick and easy meal with your grill!
A
B
C
D
E
HOW TO COLLAPSE
(FOLLOW IMAGES IN ORDER: A-F)
1. Ensure the grease cup is empty or removed.
2. Pull out and up on the left side table to fold up. Note illustration A.
3. Anchor the grill by placing your foot on the cart handle. Slowly and
carefully, lift the right side shelf, this will unlatch the cart leg from the
cooking box. Note illustration B. Fold the grill into a travel position.
Note illustration C.
4. Lock the cart into the travel position by closing the right side table
flat. Note illustration D. The slide latch shown in the detail view on
illustration D shows how the grill is secure.
5. Remove the strap from the bracket on the back of the grill, shown in
illustration E. Wrap it around the grill and connect the Velcro tape at
the end of the strap. Note illustration F.
HOW TO EXPAND
(FOLLOW IMAGES IN ORDER: F-A)
1. Remove the strap from around the grill and wind it around the bracket
on the back of the grill.
2. Press your foot against the handle pull up on the right side table. Note
illustration C.
3. Lift the grill to an upright position, make sure the leg tube is in the
underside groove. See the illustration below.
4. Lock the left side table into place. Note illustration A. The grill is now
ready for use!
F
15