xSEE858 Connections & Dipswitches The camera has a 2.1mm socket which requires 12V DC, use a regulated power supply rated above the current draw of the camera. The camera is polarity sensitive so connections must be correctly made. The camera has a standard BNC connector for the 4-in-1 video output, the output can be changed to AHD, CVI or CVBS if required.
xSEE858 OSD Menu Access to the camera menu is by Coaxitron. For the ZIP DVRs, ZIP Coaxitron is set as default. To access the Cameras Menu via coaxitron:- 1. Click on the image in Live view 2. Click on the PTZ button at the bottom of the screen 3.
Page 8
xSEE858 FUNC PRIVACY MODE OFF / ON AREA 0 CUSTOMISE AREA 1 CUSTOMISE AREA 2 CUSTOMISE AREA 3 CUSTOMISE COLOR RED / GREEN / BLUE TRANSPARENCY OFF / ON RETURN RETURN RESET SAVE – EXIT EXIT 04/04/2022 ZipDVR.com...
xSEE858 Troubleshooting 7.1 Camera Rebooting / Turning Off A. Check the voltage to the camera (under load) using a digital multi-meter, if below 10.8V then move the power supply closer to the camera. B. For 12V DC cameras, only use regulated power supply rated above the current consumption, so that the camera is always receiving the correct supply which is rated above the current consumption.
xSEE858 Specification 9.1 SEE858 Resolution 4K (8MP) Lens Type 3.6mm Fixed Image Output 1 Volt Peak-Peak 75 ohm Min.Illumination 0 Lux IR On Day/Night Mechanical (True Day-Night) IR Range Input Voltage 12V DC Current Consumption 300mA (IR On) IP Rating IP66 Video Connection BNC Socket...
Conditions 10.1 General Company Disclaimer All specifications are approximate. System Q Ltd reserves the right to change any product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible in any...
Need help?
Do you have a question about the Zip SEE858 and is the answer not in the manual?
Questions and answers