Track Log; Erase Track; Reset (Reset To Factory Defaults) - Lowrance LHR-80 Installation And Operation Instructions Manual

4-11 Track Log

Set the distance internal to 25m, 50m, or 100m for recording the track points when driving.
MENU SELECT
DSC SETUP
GET BUDDY
>TRACK LOG
1. Select TRACK LOG, then press ENTER, the 25m, 50m, 100m appear on the screen.
2. Select your desired and press ENTER to confirm.

4-12 Erase Track

Erase the track history line by this menu. So the track line will disappear on the plotter mode's
screen.
MENU SELECT
GET BUDDY
TRACK LOG
>ERASE TRACK
1. Select ERASE TRACK, then press ENTER, the radio asks for confirmation.
2. Select Yes, then press ENTER to erase the track line of the plotter screen.

4-13 Reset (Reset to factory defaults)

Use RESET to return every setting on the radio to the factory defaults, except your MMSI,
Group MMSIs and ATIS MMSI.
MENU SELECT
TRACK LOG
ERASE TRACK
> RESET
1. Select RESET, press ENTER, the radios asks for confirmation.
2. Select yes, press ENTER to reset the radio and return to the menu.
TRACK LOG
25M
>50M
100M
ERASE TRACK
YES
>NO
RESET RADIO
ARE YOU SURE
>YES
NO
Lowrance - LHR-80 Installation and Operation Instructions
MENU SELECT
DSC SETUP
GET BUDDY
> RESET
47