Settings: Cog/Sog (Course & Speed Display Options); Gps Alert - Lowrance LHR-80 Installation And Operation Instructions Manual

4-6-6 Settings: COG/SOG (Course & speed display options)
If your position and time data is being updated, you can use COG/SOG to choose whether
to show or hide your course over ground (COG) and speed over ground (SOG) data on the
screen.
Note: Despite the COG/SOG setting, if TIME DISPLAY is ON, the course and speed will not
display on screen.
MENU
BUDDY LIST
CONTRAST
> GPS/DATA
COAST GUARD
356 ° 12.6KTS
27 ° 34.126'N
109 ° 55.568'W
1. In radio set-up menu select GPS/DATA and press ENTER.
2. Move the cursor to SETTING and push ENTER.
3. Move the cursor to COG/SOG and push ENTER.
4. Select ON or OFF as desired, In this example, ON has been selected, so the screen shows
the bearing and speed.
If COG/SOG is set on, the time is NOT display on the screen.

4-6-7 GPS Alert

You can choose NO GPS DATA alarm sound is on/off.
MENU SELECT
BUDDY LIST
CONTRAST
>GPS/DATA
1. In the radio setup menu, select GPS/DATA then SETTING, next select GPS ALERT.
2. Select ON/OFF as desired, in this example, ON has been selected, so if GPS DATA is not
available, the NO GPS alert will sound.
36
GPS/DATA
MANUAL
>SETTING
GPS/DATA
MANUAL
>SETTING
Lowrance - LHR-80 Installation and Operation Instructions
SETTING
TIME DISPLAY
LL DISPLY
>COG/SOG
SETTING
LL DISPLY
COG/SOG
>GPS ALERT
COG/SOG
>ON
OFF
GPS ALERT
>ON
OFF